Supply Adapter
You just got home with your brand new Nintendo Wii, take it out of the box, and realize that you have no idea how to setup Nintendo Wii. Well, have no fear this article will walk you through this very easy process.
Starting to Setup Nintendo Wii
The first step is to figure out how you want your Nintendo Wii to orient. The Wii can lay one of two ways – horizontally or vertically. If you decide to place it vertically, you need to place the Wii in the control plate included with the packaging. When deciding which way to orient the Wii you have to consider your entertainment center and what is the best way to lay it out to keep the unit cool.
Plug in your Wii
The next step to setup Nintendo Wii is to plug it into your television and the wall socket. Check the back, or possibly front of the television to see what type of audio and visual connectors you have. Once you determine which connections are available on your television, setup Nintendo Wii by plugging the right cord into the Wii then into the television.
Next, take out the AC adapter and plug it into the wall then into the back of the Wii. This will supply your Wii with power. Make sure that if you are or plan to travel to Europe that you have the correct AC adapter. Plugging in the wrong one could cause permanent damage to your unit, so be careful.
Once the power and television are connected to you Wii, the next step to setup Nintendo Wii is to plug in the sensor bar. Find the correct jack on the Wii and plug in the cord. You then need to find a good spot to put the sensor bar so the controllers can properly orient themselves. This bar has infrared light emitters in it that need to be picked up by the controllers, so put it in a spot where there is an unobstructed line of sight between the controllers and the bar. Also, make sure that sensor bar is placed in the exact middle of the television as the controllers will align to this.
I am Lin Steven, if you want more about anti-aging, please visit my website: Nintendo Wii
|
|
Controller Adapter Supply for Sony PS2 $6.99 Controller Adapter Supply for Sony PS2. Compatible with: Sony PS2. |
|
|
Water Supply Adapter $2.15 Chrome-plated brass Speedi water supply adapter with washer. 3/8” O.D. tube x 1/2” F.I.P. slip-joint. Do it carded. |
|
|
Wasp AC Power Supply – AC Adapter $67.24 Wasp AC Power Supply – AC Adapter |
|
|
AC Power Adapter Supply USA for Nintendo Wii $9.99 AC Power Adapter Supply USA for Nintendo Wii. Compatible with: Nintendo WII. |
|
|
TopDawg Pet Supply Water Changer Faucet Adapter $15.76 AQEN FAUCET ADAPTER |
|
|
Hansa 5829 0100 0017 – PLUG POWER SUPPLY 12 V ADAPTER $300 plug power supply for 0765, 0766, 0767, 5826, and 582712 V adapter |
|
|
NU 24-to-20 Pin ATX Power Supply Adapter Cable 24-to-20 $6.99 6-Inch 24-Pin to 20-Pin ATX Power Supply Adapter Converter Cable |
|
|
StarTech.com Power Supply Motherboard Adapter – 6 $8.62 This 20 to 24-pin Power Supply Adapter features a 20-pin male ATX connector as well as a 24-pin female ATX connector, providing a cost-effective way to connect a 20-pin compatible motherboard to a power supply 24-pin connector, eliminating the need to upgrade the power supply for the sake of motherboard compatibility. |
|
|
StarTech.com Power Supply Motherboard Adapter – 6 $5.99 This 20 to 24-pin Power Supply Adapter features a 20-pin male ATX connector as well as a 24-pin female ATX connector, providing a cost-effective way to connect a 20-pin compatible motherboard to a power supply 24-pin connector, eliminating the need to upgrade the power supply for the sake of motherboard compatibility. |
|
|
Nikon EH-6 AC Adapter $82.12 EH-6 AC Adapter Power Supply for the D2 Digital Series SLR Cameras |
|
|
AC Power Adapter Supply for Toshiba PA3290-1ACA PA3290U-1ACA $21.95 Brand New Replacement 120W AC Adapter + Power Cord for Toshiba P10 P15 P20 and some of P25 (stock # P10P15) Attention! Please make sure the part#, series # and model # are all matching your original adapter. Replaces Toshiba P/N: PA3290U-1ACA and PA3290E-1ACA Compatible Models Satellite P10 Series: P10, P10-S429 P15 Series: P15-S420, P15-S470, P15-S479 P20 Series P25 Series: P25, P25-S477, P25-S487, P25-S508, P25-S509, P25-S526,P25-S5261, P25-S5262, P25-S607,P25-S609 (Attention: this adapter does NOT fit PA25-S607,PA25-S608,PA25-S609,PA25-S670,PA25-S676,PA25-S6761) |
|
|
Fuji Labs CSA-6 6 SATA Power Adapter, (15-Pin) to Power Supply (4-Pin) $5.99 Fuji Labs 6 ft SATA Power Adapter (15-pin) to Power Supply (4-pin), Needed for Seagate Serial ATA Hard Drive Adapter. |
|
|
Nikon EP5 Power Supply Connector $35.99 EP-5 Power Supply Connector – required when using EH-5a AC adapter with D5000/D3000/D60/D40 |
|
|
AC Power Adapter Supply for Toshiba PA3290-2ACA PA3290U-2ACA $21.95 Brand New Replacement 120W AC Adapter + Power Cord for Gateway Emachine M460, M520, M680, 7210GX, 7215GX, 7320GX, 7405GX (stock # A60) Replaces Gateway P/N:Part #: 2521757, 6500918 Model #: 0220A1990 Compatible Models Gateway Emachine – Gateway 7210GX, Gateway 7215GX, Gatewa 7320GZ, Gateway 7405GX, Gateway M460S, Gateway M460X, Gateway M460XL, Gateway M520, Gateway M520S, Gateway M520X, Gateway M520XL, Gateway M680 |
|
|
Belle Foret NTLTS01 TB – Closet Angle Supply Kit $42.16 Closet Angle Supply KitIncludes supply stop stop with cross handle, riser and adapter for 1/2″ IPS or 5/8″ Outer Diameter |
|
|
Belle Foret NTLTS01 CP – Closet Angle Supply Kit $30.6 Closet Angle Supply KitIncludes supply stop stop with cross handle, riser and adapter for 1/2″ IPS or 5/8″ Outer Diameter |
|
|
Belle Foret NTLTS01 PB – Closet Angle Supply Kit $42.16 Closet Angle Supply KitIncludes supply stop stop with cross handle, riser and adapter for 1/2″ IPS or 5/8″ Outer Diameter |
|
|
Belle Foret NTLTS01 SN – Closet Angle Supply Kit $42.16 Closet Angle Supply KitIncludes supply stop stop with cross handle, riser and adapter for 1/2″ IPS or 5/8″ Outer Diameter |
|
|
Belle Foret NTLTS01 ORB – Closet Angle Supply Kit $42.16 Closet Angle Supply KitIncludes supply stop stop with cross handle, riser and adapter for 1/2″ IPS or 5/8″ Outer Diameter |
|
|
Microsoft XBOX 360 AC Power Supply Adapter Charger $44.99 This is the best replacement for original Microsoft XBOX 360 power adapter. With the universal voltage input, it lets you take your Xbox 360 to anywhere in the world without a heavy voltage converter. Brand new generic. Input: 100V – 120V Output: DV 12V 3.7A Plug Type: U.S. sku:xboxcha001 Please check back of your XBOX console to determine which power supply is compatible. This item only works with 203W. |
